Sierra S5020 Technical Information PDF herunterladen (Seite 27)

3

Arm/ Bypass

23

Automatic (Timed)

Arming

Interior armed _X_

Perimeter armed _X_

Exit allowed _X_

Requires user code _X_

Automatically arms _X_

No entry allowed ___

To Change Automatic-

Arming Days:

1. Press and hold the

[walk test] key for 2 seconds

until you hear 2 beeps. Enter

the master user code.

2. Press the

key six

times until you see:

--7

3. Press the key. You

see something like this:

-2-

The three spaces in the nu-

meric display represent the

first 3 days of the week (Sun-

day-Tuesday). If a space

contains a dash, Automatic

Arming is disabled (off) for

that day. If the space contains

a number, Automatic Arming

is enabled (on).

Your system can automatically

arm itself at pre-set times of the

day. This option must be pro-

grammed into your system by

your installer.

At two minutes and again at one

minute before the Automatic

Arming sequence begins, the

siren sounds. Then, the exit de-

lay begins. You must leave the

building during the exit delay, or

an alarm sounds.

You can postpone the Auto-

matic Arming sequence by one

hour. When the siren sounds

two minutes before arming oc-

curs, press the

key,

then enter your user code.

You can change the days that

Automatic Arming occurs by

following the procedure to the

right. To stop Automatic Arm-

ing, turn off all of the Automatic

Arming days. To change the

times that arming occurs, con-

tact your installer.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 67 68

Kommentare zu diesen Handbüchern

Keine Kommentare